Nuestra web utiliza cookies para asegurar la mejor experiencia al usuario. Para continuar navegando en nuestra web, usted está aceptando el uso de cookies Más información
 
  print

Instron Used Equipment

  

Available only in the US and Canada

To view the used equipment* for a specific category, make a selection from the Category drop down list.

* -This equipment is not CE Certified.

If you don't find what you are looking for, contact us for information on our legacy products.

Category:

CategoryCatalog #NameDescriptionQtyContact
Chambers3110-585 Pull Rod Upper Pullrod, Type Cm (5/8 in connection with 1/4 in clevis pin) to Pneumatic Connection. Capacity: 1 kN (100 kgf, 225 lbf) Effective length: 361 mm (14.2 in). Diameter: 31.7 mm (1.25 in). Chamber filler plug not included; Ref. 3110-525 Checknut not used. 1 Contact Instron About Item
Chambers3110-710 Push Pull Rod Push/Pull Rod. Type Om to Of. 322mm (12.7 inch) long.1 Contact Instron About Item
Couplings2501-094 Tension Coupling Tension Coupling, Type Om (12 mm connection with 6 mm clevis pin) to Cf (5/8 in connection with 1/4 in clevis pin). Capacity: 2 kN.1 Contact Instron About Item
Couplings2501-157 Tension Coupling Tension Coupling, Type OOm (6 mm connection with 2.6 mm clevis pin) to Cf (5/8 in connection with 1/4 in clevis pin).1 Contact Instron About Item
Couplings2501-351 Coupling for 2713-006 grips Adaptor set for 2713-006 grips to Instron machines. Includes two Type Om, one Type Dm Adapters.1 Contact Instron About Item
Couplings8005-042 Attachment Kit Attachment Kit. Type IIm LH (M48X2) to IIm RH (M48X2). Includes Wedge Washers.2 Contact Instron About Item
ExtensometersLCR-UEX-2630-101 2630-101 Strain Gauge Extensometer, 10 mm gauge length, +/-10% maximum1 Contact Instron About Item
ExtensometersLCR-UEX-2630-105 2630-105 25 mm gauge length, +/-10% travel (Static)5 Contact Instron About Item
ExtensometersLCR-UEX-2630-107 2630-107 25mm gauge length 100% travel (Static)1 Contact Instron About Item
ExtensometersLCR-UEX-2630-108 2630-108 1in gauge length, 10% travel (Static)1 Contact Instron About Item
ExtensometersLCR-UEX-2630-109 2630-109 Strain Gauge Extensometer, 1 in gauge length, +50%, -10% travel (Static)1 Contact Instron About Item
ExtensometersLCR-UEX-2630-110 2630-110 Strain Gauge Extensometer, 1 in gauge length, +100%, -10% travel (Static)2 Contact Instron About Item
ExtensometersLCR-UEX-2630-115 2630-115 2in gauge length 50% travel (Static)1 Contact Instron About Item
ExtensometersU380 B3M Reconditioned Model B3M extensometer, 1" GL, 2% Measuring Range Rounds: .05" to .505" Flats: .005" to 0.500" thick x 0.500" wide 1 Contact Instron About Item
ExtensometersU383 PS6M Reconditioned Model PS6M 1 Contact Instron About Item
ExtensometersU415 Series E Reconditioned Series E Extensometer. 2" GL with +50%/-25% travel1 Contact Instron About Item
ExtensometersU592 W-6280-8 Long GL (8") Extensometer. 12.5% Strain. Rounds: 0 to 1" Flats: 0 to 0.5" thick x 1.25" wide1 Contact Instron About Item
ExtensometersU594 M300 Used M300 Automatic Extensometer for use on a LX system. GL Range: 10mm to 200mm. Rounds: 80mm max Flats: 30mm thick & 50mm wide max1 Contact Instron About Item
ExtensometersU622 Series E Extensometer E-Series I3543, 250mm guage length, 100mm travel 1 Contact Instron About Item
Faces2702-004 Faces Smooth faces. 1 x 1 inch Used with grips 2712-002, 2732-001, 2710-001 B Style1 Contact Instron About Item
Faces2702-031 Faces, Smooth Faces, Smooth Ground. 25 mm wide x 25 mm high (1 x 1 in.) . Set of 4 faces. For 2710-002, 103, 104, 2712-003, 004, 015, 016, 018, 020, and 2732-003, 004, 008, 009 Pneumatic Side Action Grips, and Screw Side Action Grips.1 Contact Instron About Item
Faces2702-033 Faces, Serrated. 25 mm wide x 25 mm high Faces, Serrated. 25 mm wide x 25 mm high (1 x 1 in.) Set of 4 faces. For 2710-002, 103, 104, 2712-003, 004, 015, 016, 018, 020, and 2732-003, 004, 008, 009 Pneumatic Side Action Grips, and Screw Side Action Grips.1 Contact Instron About Item
Faces2702-034 Faces Faces, Smooth Ground. 75 mm wide x 25 mm high (3 x 1 in.) For 2712-003, 2732-003, 2712-004, 2732-004, 2712-015, 2712-016 Pneumatic Side Action Grips, and 2710-002, S1-15455 Screw Action Grips. Set of 4 faces.1 Contact Instron About Item
Faces2702-042 Faces Hi temp faces. 1 x 1 inch. Used with grips 2712-002, 2732-001, 2710-001 B Style2 Contact Instron About Item
Faces2702-106 Faces, Smooth Faces, Smooth Ground. 25 mm x 25 mm (1 x 1 in). Specimen thickness: 0 - 20 mm. For 2712-017 Pneumatic Side Action Grips and 2712-012 Pneumatic Side Action Grips. Set of four faces.1 Contact Instron About Item
Faces2702-130 Faces Faces, Smooth Ground. 25 mm wide x 25 mm high (1 x 1 in). For 2710-004 Screw Action Grips. Set of four faces.1 Contact Instron About Item
Faces2702-140 Faces Jaw faces, smooth-ground, 50 mm wide x 30 mm high (2.0 in x 1.2 in). For specimens up to 15 mm (0.6 in) thickness. For 2710-203, 2710-204, 2710-205 grips.1 Contact Instron About Item
Faces2702-142 Jaw Faces Jaw faces, rubber-coated, 50 mm wide x 30 mm high (2.0 in x 1.2 in). For specimens up to 15 mm (0.6 in) thickness. For 2710-203, 2710-204, 2710-205 grips1 Contact Instron About Item
Faces2703-071 Faces Threaded faces. 16T per inch 16mm to 19mm(0.625 to 0.75 inch) opening Used with grips 2716-002, 2736-0021 Contact Instron About Item
Faces2703-171 Faces Serrated faces. 25mm Use with grips 2716-016, 2716-0171 Contact Instron About Item
Faces2703-182 Faces Faces, Vee Serrated. Specimen thickness range: 6-17.8 mm. For 2716-110, 111, 120, 121 Pneumatic Wedge Action Grips. Set of four.1 Contact Instron About Item
Faces2703-544 Faces Flat serrated jaw faces 100mm wide for gripping flat specimens 31-42mm thick (set of 4 faces) For use with 2742-501 grip1 Contact Instron About Item
Faces2703-555 Faces Serrated faces. 100mm wide 25 to 32mm (1.0 to 1.25inch) opening Used with grips 2742-5241 Contact Instron About Item
FacesW-5181-A Faces Faces, Flat Serrated 1.25 mm pitch grooves (20 TPI), 70 mm (2.75 in) wide. Specimen Thickness: 0 - 15 mm (0 - 0.59 in). Jaw Faces for W-5180, W-5380 WEDGE GRIP bodies and 150DX-G7(A thru-D), 300DX-G7 (A thru D) crossheads1 Contact Instron About Item
FacesW-5181-B Faces Faces, Flat Serrated 1.25 mm pitch grooves (20 TPI), 70 mm (2.75 in) wide. Specimen Thickness: 15 - 30 mm (0.59 - 1.18 in) For W-5180, W-5380 bodies and 150DX-G7, 300DX-G7 crossheads1 Contact Instron About Item
FacesW-5181-C Faces Faces, Flat Serrated 1.25 mm pitch grooves (20 TPI), 70 mm (2.75 in) wide. Specimen Thickness: 30 - 45 mm (1.18 - 1.77 in)For W-5180, W-5380 bodies and 150DX-G7, 300DX-G7 crossheads1 Contact Instron About Item
FacesW-5185-B Faces Faces, Vee Serrated 1.25 mm pitch grooves (20 TPI). Specimen Diameter: 5 - 15 mm (0.196 - 0.59 in. Jaw Faces for W-5180, W-5380 WEDGE GRIP bodies and 150DX-G7(A thru-D), 300DX-G7 (A thru D) crossheads1 Contact Instron About Item
FacesW-5185-C Faces Faces, Flat Serrated 1.25 mm pitch grooves (20 TPI), 70 mm (2.75 in) wide. Specimen Thickness: 30 - 45 mm (1.18 - 1.77 in. Jaw Faces for W-5180, W-5380 WEDGE GRIP bodies and 150DX-G7(A thru-D), 300DX-G7 (A thru D) crossheads1 Contact Instron About Item
FacesW-5185-D Faces Faces, Vee Serrated 2.5 mm pitch grooves (10 TPI). Specimen Diameter: 30 - 45 mm (1.18 - 1.77 in) Note: Maximum Jaw face separation fully open-front grip loading is 37 mm (1.46 in). Specimens of greater diameter require end loading. Jaw Faces for W-5180, W-5380 WEDGE GRIP bodies and 150DX-G7(A thru-D), 300DX-G7 (A thru D) crossheads1 Contact Instron About Item
Fixtures2810-411 Micro 3 Point Bend Fixture Micro 3 Point Bend Fixture Adjustable Span: 3 mm to 10 mm. Capacity 1 kN (225 lb, 100 kgf). Temperature range: -75°C to 300°C (-103°F to 572°F). Maximum specimen width: 20 mm (0.79 in). Upper and lower fittings: Type Om (12 mm connection with 6 mm clevis pin). ref. S4843A1 Contact Instron About Item
FixturesPR10754-8 Dies Shear fixture Die Shear fixture with 10 mm. 1 kN Capacity1 Contact Instron About Item
Grip Accessories2701-042 Air Distribution Kit Air Distribution Kit, External. For use with 2712-002, 003, 004, 014, 015, 018, 019, 020, and 2712-04x grips only. Includes hoses and fittings with 1/4 NPTM end connection.1 Contact Instron About Item
Grips2710-101 Screw Side Action Grip Advanced Screw Side-Action Grips. Capacity: 100 N (10 kgf, 20 lbf). Temperature Range: -70 °C to +125 °C (-94 °F to +257 °F) Upper and lower fittings: Type Om (12 mm connection with 6 mm clevis pin) Features: - Dual screw actuation with graduated cylinders - Snap-on jaw face mechanism with self-alignment - Wide opening suitable for specimen thicknesses up to 30 mm (1.2 in) Requires jaw faces1 Contact Instron About Item
Grips2711-001 Fiber Clamps Fiber Clamps. 5N Upper Type A Lower Type D3 Contact Instron About Item
Grips2712-001 Pneumatic Side Action Grips Pneumatic Side Action Grips. Capacity: 5 N (1.0 lb, 500gm). Temperature range: -29 °C to 80 °C (-20 °F to 176 °F). Maximum specimen thickness: 3.96 mm (0.156 in). Upper fitting: Type A (Hook). Lower fitting: Type Dm (1.25 in connection with 1/2 in clevis pin). Includes one pair of 9.5 x 9.5 mm smooth faces. Requires an Automatic Air Control Kit or Pneumatic Foot Switch2 Contact Instron About Item
Grips2712-013 Pneumatic Side Action Grips Pneumatic Side Action Grips. Capacity: 5 N (1.0 lb, 500gm). Temperature range: -29 °C to 80 °C (-20 °F to 176 °F). Maximum specimen thickness: 3.96 mm (0.156 in). Upper and lower fittings: Type Om (12 mm connection with 6 mm clevis pin). Includes 9.5 x 9.5 mm smooth faces. Requires an Automatic Air Control Kit or Pneumatic Foot Switch1 Contact Instron About Item
Grips2712-041 Pneumatic Side Action Grips. Pneumatic Side Action Grips. Capacity: 1 kN (100 kg, 225lb). Temperature range: -20 °C to +100 °C (-4 °F to +212°F). Maximum specimen thickness: 13mm (0.5 in)* *Depends on jaw faces selected Upper and lower fittings: 6 mm clevis pin, male2 Contact Instron About Item
Grips2712-042 Pneumatic Side Action Grip Pneumatic Side Action Grips. Capacity: 2 kN (200 kg, 450 lb,). Temperature range: -20 °C to +100 °C (-4 °F to +212°F). Maximum specimen thickness: 20mm (0.75 in)* *Depends on jaw faces selected Upper and lower fittings: 6 mm clevis pin, male. Requires jaw faces and an Air Distribution Kit. Optional Air Control Kit with footswitch is available.3 Contact Instron About Item
Grips2712-045 Pneumatic Side Action Grips Pneumatic Side Action Grips. Capacity:5kN (500 kg,1250 lb.) Temperature range: -20 °C to 100 °C (-4 °F to 212°F). Maximum specimen thickness: 26mm (1 in)* *Depends on jaw faces selected Upper and lower fittings: 0.5 in clevis pin, male. Requires jaw faces and an Air Distribution Kit. Optional Air Control Kit with footswitch is available.2 Contact Instron About Item
Grips2712-046 Pneumatic Side Action Grips. Pneumatic Side Action Grips. Capacity: 10 kN (1000 kg, 2250 lb,). Temperature range: -20 °C to +100 °C (-4 °F to +212°F). Maximum specimen thickness: 26mm (1 in)* *Depends on jaw faces selected Upper and lower fittings: 0.5 in clevis pin, male. Requires jaw faces and an Air Distribution Kit. Optional Air Control Kit with footswitch is available.4 Contact Instron About Item
Grips2713-001 Self Tightening Roller Grips Self Tightening Roller Grips. Capacity: 1.0 kN (200 lb, 100 kg). Temperature range: -73 °C to 150 °C (-100 °F to 302 °F). Upper fitting: Type Cm (5/8 in connection with 1/4 in clevis pin). Lower fitting: Type Dm (1.25 in connection with 1/2 in clevis pin). Includes rubber covered snubbing rollers and smooth snubbing rollers. For elastomeric samples. *Rubber Rollers ONLY1 Contact Instron About Item
Grips2715-002 Capstan grip faces Smooth faces for 2715-0011 Contact Instron About Item
Grips2716-010 Mechanical Wedge grip Wedge Action Grips, Capacity: 5 kN (1,000 lb, 500 kg). Temperature range: -150 °C to 250 °C (-240 °F to 480 °F). Maximum specimen size is face determined. Upper and lower fittings: Type Dm. (1.25 in connection with 1/2 in clevis pin). Requires faces1 Contact Instron About Item
Grips2717-056 Grips Self-Aligning Tension Grip Body. Capacity: 250 kN (50,000 lb, 25,000 kg). For threaded and shouldered specimens. Temperature range: 0 °C to 150 °C (32 °F to 300 °F). Upper and lower fittings: Type IIm LH (M48x2) Requires grip heads to suit specimen.1 Contact Instron About Item
Grips2732-008 Grips Pneumatic Side Action Grips. Capacity: 1 kN (200 lb, 100 kg). Temperature range: -73 °C to 316 °C (-100 °F to 600 °F). Maximum specimen thickness: *6.35 mm (0.25 in) *Reduced by 1.6 mm (0.062 in) with rubber coated faces. Upper and lower fittings: Pneumatic connection. Requires faces, pneumatic pullrods and an Automatic Air Control Kit or Pneumatic Foot Switch. Maximum face height: 38 mm (1.5 in)2 Contact Instron About Item
GripsCP103444 Hydraulic Wedge Action Grip Hydraulic Wedge Action Grips. Capacity 300 kN (67,500 lbf, 30,000 kgf) Specimen Range: - Flats: 0 - 50 mm thick (0 - 2.0 in) x 70 mm (2.75 in) wide - Rounds: 3 - 40 mm (0.118 - 1.57 in) diameter Minimum Specimen Length without the use of an extensometer is 270 mm (10.63 in) Ambient temperature use only. Upper and Lower Fittings: Type IIfRH (M48 x 2) Weight Per Grip Body 123 kg (270 lb) Grip Body Dimensions W x L x D: 445 x 302 x 127 mm (17.5 x 11.875 x 5 in) Effective Length using standard threaded mounting: Upper - 329 mm (13.0 in) Lower - 352 mm (13.8 in) Grip faces sold separately use: W-5181 & W-5185 series grip faces Notes: 1) Hydraulic hoses, manifolds and mounting hardware when purchased with a new 300LX or 300KN testing system are provided. (Select mounting options corresponding to load frame and test space option of the machine grips are to be used on. Consult IPG Business team for all other applications.) 2) Note: If integrating these grips on an LX frame, the frame must be configured with a minimum of 300 mm (1 foot) of extended height in order to accomodate calibration fixtures.1 Contact Instron About Item
GripsU593 W-5021 & W-5012 Used 100kN (22,500 Lbs) T-Grip Bodies & flat jaws (16 TPI diamond cut). Flats: Up to 1/2" thick x 1" wide. 1 Contact Instron About Item
GripsW-1409-A 600DX, or 120HVL Flat Grip Jaw Set 50% OFF SALE THROUGH DECEMBER 15TH. NEW OLD STOCK - LIST PRICE - $2080, ON SALE FOR $1040!!! Set of (4) wedge grip jaws for flat specimens from 0 to 45 mm (1.75 in) thick by up to 70 mm (2.75 in) wide. Tooth Profile: Diamond cut, 16 TPI (teeth per inch) 2 Contact Instron About Item
GripsW-1563 200 HVL Grips For Round Specimens 50% OFF SALE THROUGH DECEMBER 15TH. NEW OLD STOCK - LIST PRICE - $3640, ON SALE FOR $1820!!! Set of (4) Vee wedge grip jaws for round specimens from 0.5 in (12.7 mm) to 2.25 in (57 mm) diameter. Tooth Profile: Horizontal cut, 16 TPI (teeth per inch) 2 Contact Instron About Item
Load CellsLCR-UEX-2519-106 2519-106 2kN S-Beam type load cell2 Contact Instron About Item
Load CellsLCR-UEX-2525-815 2525-815 2.5 N Drop Through Static1 Contact Instron About Item
Load CellsLCR-UEX-2530-439 2530-439 5 N Low Profile Static8 Contact Instron About Item
Load CellsLCR-ULC-2519-101 2519-101 10N S-Beam Static15 Contact Instron About Item
Load CellsLCR-ULC-2519-102 2519-102 50N S-Beam Static8 Contact Instron About Item
Load CellsLCR-ULC-2519-103 2519-103 100N S-Beam Static16 Contact Instron About Item
Load CellsLCR-ULC-2519-105 2519-105 1kN S-Beam Static2 Contact Instron About Item
Load CellsLCR-ULC-2519-107 2519-107 5kN S-Beam Static9 Contact Instron About Item
Load CellsLCR-ULC-2525-804 2525-804 10kN Drop Through Static1 Contact Instron About Item
Load CellsLCR-ULC-2525-805 2525-805 5kN Drop Through Static1 Contact Instron About Item
Load CellsLCR-ULC-2525-810 2525-810 30kN Drop Through Style Static3 Contact Instron About Item
Load CellsLCR-ULC-2525-816 2525-816 500N Drop Through Static1 Contact Instron About Item
Load CellsLCR-ULC-2527-130 2527-130 1kN Sandwich Style Dynamic (Dynacell)2 Contact Instron About Item
Load CellsLCR-ULC-2527-131 2527-131 250 N Sandwich Style Dynamic (Dynacell)3 Contact Instron About Item
Load CellsLCR-ULC-2530-405 2530-405 5kN Low Profile Static13 Contact Instron About Item
Load CellsLCR-ULC-2530-418 2530-418 2kN Low Profile Static1 Contact Instron About Item
Load CellsLCR-ULC-2530-427 2530-427 100N Low Profile Static13 Contact Instron About Item
Load CellsLCR-ULC-2530-428 2530-428 10N Low Profile Static5 Contact Instron About Item
Load CellsLCR-ULC-2530-437 2530-437 50N Low Profile Static2 Contact Instron About Item
Load CellsLCR-ULC-2530-443 2530-443 10kN Low Profile Static2 Contact Instron About Item
Load CellsLCR-ULC-2530-444 2530-444 30kN Low Profile Static2 Contact Instron About Item
Load CellsLCR-ULC-2530-445 2530-445 50kN Low Profile Static7 Contact Instron About Item
Load CellsLCR-ULC-2580-107 2580-107 Static Load Cell +/-2kN4 Contact Instron About Item
Load CellsLCR-ULC-2580-108 2580-108 Static Load Cell +/-5kN4 Contact Instron About Item
Load CellsW-5535-8 5kN Load Cell 50% OFF SALE THROUGH DECEMBER 15TH. NEW OLD STOCK - LIST PRICE - $3050, ON SALE FOR $1525!!! Heavy Duty Tension/Compression Load Cell, Capacity 5 kN (500 kg, 1,100 lb.) -Mounting, and adapter connection, M16 female - Minimum 300% overload capacity - Integral load stops minimize chance of cell damage during overload conditions. - Equipped with 25 pin type D style connector for 3300, or 5500 test systems 1 Contact Instron About Item
Load CellsW-5535-9 10kN Load Cell - New 50% OFF SALE THROUGH DECEMBER 15TH. NEW OLD STOCK - LIST PRICE - $3280, ON SALE FOR $1640 Heavy Duty Tension/Compression Load Cell, Capacity 10 kN (1,000 kg, 2,200 lb.) - Accuracy +/- 0.5% of reading from 1% to 100% of load cell capacity when used with SF Series Spring Testers - Mounting connection, M16 female - Adapter connection M16 female - Minimum 300% overload capacity - Integral load stops minimize chance of cell damage during overload conditions. 1 Contact Instron About Item
Platens2501-107 Platen Compression Platen. 50N 13 sq cm (2 sq inch) 40.6mm (1.6 inch) diameter. Type Om connection1 Contact Instron About Item
Platens2840-112 Platen Fatigue Rated Spherical Seat, Capacity 500kN (110 kip) Static / 250kN (56 kip) Dynamic. - For Use With 2840-118,-119 Or -110 Platens - Includes adaptor to M30 x 2 right hand or M48 x 2 right hand compression platen - Mechanical interface: M48 x 2 right hand female thread Quantity: 1 seat1 Contact Instron About Item
Información relacionada
Contáctenos
  1. Call Instron
  2. Solicitud de ventas
 
más...
view Instron Community Blog